Lead molds for Jig Heads

OK Guys need some wisdom.......anyone have molds and or melt and pour their own? Wanting to purchase a mold or two, 1/2, 3/4 1 OZ for salt water soft baits. So many to choose from and different prices. Much appreciated............GT

I pour my own in darter and ball type mostly but recently bought some larger and flutter jig molds. I use a do-it melting pot and it seems to do fine with most pours just make sure to pre heat your molds over a burner or a propane torch so you get a consistent pour, if the mold is too cold the lead will cool and won't fill the cavity entirely so you will have to dip the hook back in the melting pot to get the lead off and try again. They sell special paints but as long as my jig heads last I found spray paint works fine. I get my molds from Ebay, tackle swap meets and garage sales if I come across them. As for hooks and other supplies I get them at these two sites.

[You must be registered and logged in to see this link.]

Good luck and hit me up if you have any other questions.

I am with Vagabond check with

[You must be registered and logged in to see this link.]
or maybe
[You must be registered and logged in to see this link.]

Thanks Vagabond, Jeff.........I will check out the sites you mentioned. Much appreciated....GT

I think I will start with a Shad mold, 1/2, 3/4 oz staggered barb for salt plastics.

Check out JigCraft.com  They have what you need.

[You must be registered and logged in to see this link.]